CMT7E 2400W ON OFFER!

Home Catalogue Boring bits and forstner bits

537.inc FORSTNER BITS

FORSTNER BITS
TECHNICAL DETAILS:
  • Super strength SP steel.
  • Precision balanced centre point.
  • 2 spurs (V2).
  • 2 precision ground cutting edges (Z2).
  • Long-lasting cutting performance.

 
TIPS AND WARNINGS
  • Making repeated shallow cuts and allowing the bit to cool for two or three seconds between passes will increase the life of your bit. Overheating caused by chip buildup or constant contact with the cutting surface will remove the temper from the bit’s cutting edges.
  • You can also extend the life of your bits by not exceeding the maximum speed recommended for the type of wood. Applying excessive force to the bit while drilling will also cause overheating.
  • Remove all the chips from the previous hole before boring a second or subsequent hole when mortising.
  • Small Forstner bits can be used in a hand drill, but the results are usually less than satisfactory. Using bits larger than 19mm (3/4”) in a hand drill can cause injury when the bit hangs on an imperfection in the wood.
  • Always wear proper eye and hearing protection when working with power tools.

 


Used to drill precise flat bottom holes with no chipping in any softwood thickness.

 

 
RECOMMENDED R.P.M.:
Part. No.
D (mm)
Softwood
Hardwood
537.064.31
1/4
2400
700
537.095.31
3/8
2400
500
537.127.31
1/2
2400
500
537.158.31
5/8
2400
500
537.190.31
3/4
1500
500
537.222.31
 7/8 1500
500
537.254.31
 1 1500
500
537.285.31
 1-1/8 1000 250
537.317.31
 1-1/4 1000 250
537.349.31
1-3/8
 500 250
537.381.31
1-1/2
 500 250
537.413.31
1-5/8
500
250
537.445.31
 1-3/4 500
250
537.476.31
 1-7/8 500
250
537.508.31
 2 500
250
537.540.31
2-1/8
500
250

 

Delivery time: 3 working days

Secure payment:

VisaMaestroMastercard PostepayPaypalAmerican Express
Paga gli acquisti tra € 30 e € 2.000 in 3 rate senza interessi con PayPal Scopri di più

Average rating

(2 commenti)

Feedbacks

Punte forstner cmt

Sito veloce, spedizione pure

Em
excellente qualité

Comme expliqué sur le site il faut laisser la meche refroidir de temps en temps mais j'ai percé a 54 mm de diametre sur une epaisseur de 45 mm en 3 passes dans du chene

Kervenno22
impeccable

une étoile de moins pour le marquage sur queue emplacement du serrage du mandrin , celui ci aurait pu être placé sur la parti plus basse

fireaero01

Product into the same category

From  € 27,68 (vat excluded)
Details
From  € 52,67 (vat excluded)
Details
From  € 9,87 (vat excluded)
Details
From  € 64,14 (vat excluded)
Details
(6)
537 FORSTNER BITS
From  € 8,14 (vat excluded)
Details
From  € 12,51 (vat excluded)
Details
From  € 8,44 (vat excluded)
Details
From  € 21,02 (vat excluded)
Details
From  € 24,69 (vat excluded)
Details
From  € 61,26 (vat excluded)
Details
From  € 21,33 (vat excluded)
Details
From  € 51,00 (vat excluded)
Details
From  € 25,46 (vat excluded)
Details
From  € 28,71 (vat excluded)
Details
From  € 50,33 (vat excluded)
Details
From  € 47,90 (vat excluded)
Details
From  € 26,89 (vat excluded)
Details
From  € 153,13 (vat excluded)
Details
From  € 51,37 (vat excluded)
Details
From  € 203,54 (vat excluded)
Details
From  € 48,78 (vat excluded)
Details
From  € 102,07 (vat excluded)
Details
From  € 4,92 (vat excluded)
Details
From  € 16,51 (vat excluded)
Details
(3)
529-mm PLUG CUTTERS
From  € 42,64 (vat excluded)
Details
From  € 57,18 (vat excluded)
Details
From  € 210,18 (vat excluded)
Details
From  € 5,05 (vat excluded)
Details
From  € 22,29 (vat excluded)
Details
From  € 114,59 (vat excluded)
Details
From  € 66,22 (vat excluded)
Details
From  € 11,38 (vat excluded)
Details
From  € 1,66 (vat excluded)
Details
From  € 37,82 (vat excluded)
Details
From  € 48,80 (vat excluded)
Details
From  € 26,89 (vat excluded)
Details
From  € 18,46 (vat excluded)
Details
From  € 28,11 (vat excluded)
Details
(2)
542-535 AUGER BITS
From  € 6,93 (vat excluded)
Details
From  € 42,33 (vat excluded)
Details
From  € 10,39 (vat excluded)
Details
From  € 28,78 (vat excluded)
Details
From  € 38,78 (vat excluded)
Details
From  € 18,68 (vat excluded)
Details
From  € 52,22 (vat excluded)
Details
From  € 7,47 (vat excluded)
Details
From  € 105,40 (vat excluded)
Details
From  € 55,38 (vat excluded)
Details
From  € 11,75 (vat excluded)
Details
From  € 62,45 (vat excluded)
Details
From  € 2,79 (vat excluded)
Details
From  € 173,20 (vat excluded)
Details
From  € 42,64 (vat excluded)
Details
From  € 48,78 (vat excluded)
Details
From  € 39,17 (vat excluded)
Details
Tools made according to customer designs

Visit the page and upload your design

Go to page
Tool sharpening

Professional sharpening with home collection

Go to page
Assistance

Orders and assistance by phone or WhatsApp

+39 339 1696947
Catalogue

Download here the general catalogue

Download catalog CMT Download catalog Festool
Newsletter

Register now to receive special offer monthly

Feedbacks
Our strenghts

  • Assortment

  • Quality

  • Guaranteed price

  • Fast shipping

  • Made in Italy

Useful links
Secure payements
VisaMaestroMastercard PostepayPaypalAmerican Express
Contacts

Mobiltecnica S.r.l.

VAT ID 02752210415

Via G. Palatucci, 2 61029 Trasanni di Urbino (PU)

Tel. +39 339 1696947

info@mobiltecnica.com

Whatsapp assistance

Products Comparison (0)
Add products you want compare Hide Show
Products Comparison